Titanium Profiles & Sections
Titanium & titanium-alloy profiles — angle, channel, T-bar, H-section, square/rectangular tube and custom aerospace shapes — to AMS 4911L, ASTM B381 and GB/T 3621.
Product Gallery
Click any image to enlarge. Angle, channel, T-bar, H-section, square/rectangular tube and custom profiles.
Overview
Titanium profiles are supplied in a full range of cross-sections: simple sections such as angle (L-type), channel (U-type) and T-bar; complex sections such as H-section and square/rectangular tube; and custom aerospace shapes made to drawing.
Profiles are produced by electron-beam (EBM) or vacuum-arc (VAR) melting with tight oxygen control (<800 ppm), then pickled and polished to a clean, crack-free finish. Aerospace-grade TC4 is held to Al ±0.15% and V ±0.1%.
Forms available: angle, channel, T-bar, H-section, square & rectangular tube, custom profiles.
Common Grades
Manufacturing & Standards
Pickled & polished · Ra ≤0.8 μm · thickness ±0.1 mm
AMS 4911L · ASTM B381 · GB/T 3621-2022
Performance & Applications
TC4 reaches 240 MPa·cm³/g — about twice that of aluminium alloy.
Resists seawater and chloride attack; 3-5× longer service life for chemical equipment.
Suitable for orthopedic implants and medical structures.
Thickness tolerance to ±0.1 mm; flaw-free decorative surfaces.
Request A Quote
Send us your grade, section type, dimensions / drawing and quantity — we reply within 24 hours with a competitive quotation.
